|
Everything is working beside roaming Yes im using encryption, should I turn it
off, or uses the same wep key, and same ssid Should I then also just add 1 config with
1 access point , not 2? From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andrew Joakimsen Disable WDS but set all
the AP to the same channel and same SSID and then make sure they are connected
to the same LAN (IE: no NAT on the AP). Are you using encryption? On 11/9/06, Altus
Snyman <[EMAIL PROTECTED]>
wrote: Good
day all I
cant get my WIP 5000 to roam 100% I
have 2 access points, different SSI's I
make a config1 and config2 on the phone, each for the different SSID's(A &
B) Im
standing next to A and I walk to B, but…the phone does not want to change its
signal to B, it still keeps the bad signal from A If
I power A down, it will switch to B, if I switch A back on and go stand next to
it, it will still keep B's signal We
got some wireless specialist's in and they set up WDS for us, in other words,
you add 1 SSID for both access point IT
works for windows, but not for the phone! Can
anyone help, or give a bit more explanation on the roaming settings on the
webconfig Try
RxLevel (-103~0) PreRoaming
Enable RxLevel (-103~0) Try Over
TxError Count (0~10000) Try Over
RxError Count (0~10000) Level
Diff Higher Than Curr Site (0~255) Use
Refresh PreRoaming Enable
PreRoaming On Association PreRoaming
Mode PreRoaming
Refresh Interval (0:Disable,
0~3600) Thanks
|
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
