Noc,
it seems your zap*.conf are ok....have you tried to do all the modules
loading procedure step by step?
ztcfg -s
modprobe -r wctdm
modprobe wctdm
ztcfg -vv
Giorgio Incantalupo
Noc Phibee wrote:
Thanks Giogio,
but no i don't have this module
bye
Giorgio Incantalupo a écrit :
Hi Noc,
I had similar problem. Check If you have netjetpci module and try to
delete it...this solved my problem.
Giorgio Incantalupo
Noc Phibee wrote:
Hi
i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect
my asterisk to a french analog line.
In my zaptel.conf, i have:
loadzone=fr
defaultzone=fr
fxols=3
when i load the module, i have in logs:
Nov 24 06:13:40 gw kernel: Freed a Wildcard
Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded
Nov 24 06:13:40 gw zaptel: Removing zaptel module: succeeded
Nov 24 06:13:42 gw kernel: Zapata Telephony Interface Registered on
major 196
Nov 24 06:13:42 gw kernel: Zaptel Version: 1.2.9.1-1mdv2007.0 Echo
Canceller: KB1
Nov 24 06:13:42 gw zaptel: Loading zaptel framework: succeeded
Nov 24 06:13:42 gw kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] ->
GSI 21 (level, low) -> IRQ 20
Nov 24 06:13:43 gw kernel: Freshmaker version: 73
Nov 24 06:13:43 gw kernel: Freshmaker passed register test
Nov 24 06:13:43 gw kernel: Module 0: Not installed
Nov 24 06:13:43 gw kernel: Module 1: Not installed
Nov 24 06:13:43 gw kernel: Module 2: Not installed
Nov 24 06:13:43 gw kernel: Module 3: Installed -- AUTO FXO (FCC mode)
Nov 24 06:13:43 gw kernel: Found a Wildcard TDM: Wildcard TDM400P
REV I (1 modules)
Nov 24 06:13:44 gw kernel: Registered tone zone 2 (France)
Nov 24 06:13:44 gw zaptel: Running ztcfg: succeeded
and my problems are whit all sample that i have, asterisk don't
restart and put me:
Nov 24 06:15:17 NOTICE[2943] cdr.c: CDR simple logging enabled.
Nov 24 06:15:17 WARNING[2943] chan_zap.c: Unable to specify channel
3: No such device
Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to open channel 3: No
such device
here = 0, tmp->channel = 3, channel = 3
Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to register channel '3'
Nov 24 06:15:17 WARNING[2943] loader.c: chan_zap.so: load_module
failed, returning -1
Nov 24 06:15:17 WARNING[2943] loader.c: Loading module chan_zap.so
failed!
for all channel (i have tested from 1 to 5)
my zapata.conf:
[trunkgroups]
[channels]
context=default
signalling=fxo_ls
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
musiconhold=default
channel => 3
where is my errors ?
Thanks for your help
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
