Ok. So, it's not that I can make Asterisk listen on multiple ports for any SIP friend, but I could override the port on an individual SIP friend.
So, instead of having something like: bindport=5060,5080,5081,5082 in the general section of sip.conf, I need to just have bindport=5060 in the genearl section and then something like: port=5080 (or whatever number) in any individual SIP friend profile. Correct? Thanks, Daniel -----Original Message----- From: "Zeeshan Zakaria" <[EMAIL PROTECTED]> Sent: Wed, November 29, 2006 4:42 am To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Subject: Re: [asterisk-users] SIP Port 5060 Its easy. In sip.conf, under each phone/DID setting, define a different port. e.g. If 8789092323 is assigned to a person in country abc where SIP is blocked, in your sip.conf, under [8789092323] add port=12000 or whatever you like. This will override the default port=5060 setting in sip.conf. I've tried this and it worked for me. But now on the other end the users will also need to change their ports. You'll have to tell them how to change it in their soft/hard phones. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
