Hi guys,
Here is a bit more detailed information of my problem:
If I connect Asterisk PBX to the Polish telco via E1, I don't get any red
alarms or anything. The line seems to be fine and the inbound calls are also
accepted by the Asterisk. However, whenever I try to make an outbound call, the
call is either stuck (Asterisk just displays Called g1/482.... and then
nothing), or I get the following message:
-- Called g2/........
-- Channel 0/1, span 3 got hangup
-- Zap/63-1 is circuit-busy
-- Hungup 'Zap/63-1'
== Everyone is busy/congested at this time (1:0/1/0)
The telco guys say that my request to make an outbound call is missing a RING
message. What must be set in the zapata.conf or zaptel.conf to make Asterisk
send RING message? Does anyone have any sample zapata.conf or zaptel.conf for
connection between Asterisk to Polish telco via E1?
Any suggestions will be most appreciated,
Alex
____________________________________________________________________________________
Yahoo! Music Unlimited
Access over 1 million songs.
http://music.yahoo.com/unlimited_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
