On 2 Dec 2006, at 16:59, Alex Rixhardson wrote:
Hi guys,
Here is a bit more detailed information of my problem:
If I connect Asterisk PBX to the Polish telco via E1, I don't get
any red alarms or anything. The line seems to be fine and the
inbound calls are also accepted by the Asterisk. However, whenever
I try to make an outbound call, the call is either stuck (Asterisk
just displays Called g1/482.... and then nothing), or I get the
following message:
-- Called g2/........
-- Channel 0/1, span 3 got hangup
-- Zap/63-1 is circuit-busy
-- Hungup 'Zap/63-1'
== Everyone is busy/congested at this time (1:0/1/0)
The telco guys say that my request to make an outbound call is
missing a RING message. What must be set in the zapata.conf or
zaptel.conf to make Asterisk send RING message? Does anyone have
any sample zapata.conf or zaptel.conf for connection between
Asterisk to Polish telco via E1?
I don't think (based on the debug output in your other email) that it
is getting to the 'ring' phase.
the telco rejects the call as having a protocol error in the setup
message. They don't like
one of the info elements in your setup message.
You could try playing with the TON and calling name fields.
(
pridialplan=
usecallerid=
hidecallerid=
usecallingpres=
in zapata.conf
)
Tim.
Any suggestions will be most appreciated,
Alex
Check out the all-new Yahoo! Mail beta - Fire up a more powerful
email and get things done faster.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Tim Panton
www.mexuar.net
www.westhawk.co.uk/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
