You MUST set the options BEFORE the channel= line or they won't be used.
jason wrote:
Most certainly. This is my current file. I've toyed with the gain
settings, going as high as 100 on rxgain and even toyed with txgain for
a bit. It's very bare because I haven't invested any further time into
this machine until I get the gain figured out. On a side note, I've used
this card in a Xen VM running 1.2 and did not have any gain issues.
----------------------------------
; Zapata telephony interface
[trunkgroups]
;
[channels]
;
context=incoming
switchtype=national
;
signalling=fxs_ks
channel=>1
usecallerid=yes
cidsignalling=bell
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default
Tzafrir Cohen wrote:
On Tue, Dec 12, 2006 at 08:57:05AM -0600, jason wrote:
Hey guys, I'm having some trouble with gain settings using a Wildcard
X100P and Zaptel 1.4 Beta 2 on Asterisk 1.4 beta 3. My transmit
volume between an IAX client (idefisk) and a POTS device through my
1.4 box is great, but my receive volume is terrible. I can hardly
hear a word they say. I've cranked my gains up to 100, inserted the
wcfxo module with boost=1, but haven't had any luck figuring this
out. Using ztmonitor, the best I can get on my RX side is 3 #'s
(###)) and that's if I really talk loudly into the phone. Any
pointers on other places I can look? Volume is great on IAX to IAX,
only poor on calls from IAX to POTS. I haven't tried the other
direction because this box isn't setup to receive POTS calls.
Could you post your zapata.conf ?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
