PRI is just a standard used on the T1 medium. If you have a solid T1 between the locations. Why not use PRI on the T1. If the T1 is dedicated point to point between locations, then you can use PRI on the line dedicating one channel to signaling (d channel). If you can't give up the 24th channel then have a look at HDLC. I know the sangoma cards support HDLC, but I am not sure about Digium. If you choose PRI, then you just need to set one side as pri_net and the other as pri_cpe.
On 1/4/07, David Gomillion <[EMAIL PROTECTED]> wrote:
T1s can use many different signalling types. You need to find out which one is running, what the line encoding is, etc. PRI vs T1 are not the only distinctions... On 1/4/07, Mark Greene <[EMAIL PROTECTED]> wrote: > Alright guys here is my question. What is do I need to set switchtype, and signalling to in zapata for a voice T1. This is not a PRI. I cannot say that enough. It is NOT, A, PRI. It is just a Voice T1 with 24 voice channels. There is not a D Channel. It runs from one office to another and USED to plug into two opt. 11c but now one end is going to plug into an asterisk box. > > - Mark > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
