> T1s can use many different signalling types. You need to find out which > one is running, what the line encoding is, etc. PRI vs T1 are not the only > distinctions... > > On 1/4/07, Mark Greene <[EMAIL PROTECTED]> wrote: >> Alright guys here is my question. What is do I need to set switchtype, and >> signalling to in zapata for a voice T1. This is not a PRI. I cannot say that >> enough. It is NOT, A, PRI. It is just a Voice T1 with 24 voice channels. I believe switchtype applies only to ISDN and not to a channelized T1. >> There is not a D Channel. It runs from one office to another and USED
>> to plug into two opt. 11c but now one end is going to plug into an asterisk >> box. Our local telco provides E & M with wink so we use signalling=em_w in zapata.conf As others have said, you will need to find out the details for your setup. Don Pobanz
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
