I am running the newest version, from the sangoma wiki. Jon
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Davies Sent: 26. januar 2007 10:56 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > Hello List > > I am having a rather big problem with a sangoma A104 card, I just installed > to replace a Digium TE410 card, that was acting up. > > But now we have a problem with the sangoma card. It runs great after being > started, and calls proceed as normal, but after about 1 hour, it stops being > able to make and receive calls. > > If I run wanpipemon debug, can see that the card still receives packets > from the ISDN, but when I make a call, I cant see it in wanpipemon, and > asterisk just responds with a: > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 - > Circuit/channel congestion) > > I am pretty shure that this is a configuration issue, but are there anything > I need to be aware of when moving from a Digium card to a sangoma card? Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded as there are some resource leak fixes in that version. Regards, Steve _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
