On Sat, Jan 27, 2007 at 07:40:31AM +0800, Leo Ann Boon wrote: > Kyle Gordon wrote: > > > >fxsks=1 #X100P > Is your line truly a kwelstart line? try fxsls
And if the line is ls, indeed, what harm is there in setting it up as ks? Consider, e.g. http://svn.digium.com/svn/asterisk-gui/trunk/tools/zapscan.c > ><SNIP> > >busydetect=yes > You may need to add these 2 values to help the busydetect > busycount=3 > busypattern=375,375 this should have been progzone=uk , only it turns out that the UK progzone actually sets it to 400. I'd like to ask again: where are you using specific progzones and buzypatterns successfully? Those magic values should be better documented. > > busypattern tells asterisk how your busy tone sounds like, in UK it > should be 400Hz 0.375s ON and 0.375s OFF. The busycount tells asterisk > how many consecutive cycles it must detect before dropping the line. > You'll have to determine the best value for your setup, by trial and > error. Too low - you might get premature hangup, too high - you'll have > to wait for a long time for the line to hangup. A value of 3 will cause > Asterisk to hang up in about 2.1s. -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
