Yuan LIU wrote:
From: Leo Ann Boon <[EMAIL PROTECTED]>
Yuan LIU wrote:
Related to callerid: I can't get text ID to work in an analog phone
on FXS. I tried the above format, it simply displays the entire
string in both numeric and text field (i.e., displays the same
string twice). Tried a few other ways, got varied results (some
resulting in "Unknown"). Nothing can get the analog phone to
display name in text field and number in numeric field.
I'm using TDM400, phone is 27935GE3-B, Zaptel 1.2.10, Asterisk
1.2.12. On a "normal" line, the phone displays name on one line and
number on another.
Anyone sending caller ID to FXS?
Works fine with my GE29393GE2-A. I think you need the right syntax,
in your .conf it should look like
callerid="John Doe" <1234>
Note the quotes around the name.
Leo
Ain't working. 27935GE3-B simply says "unknown" or displays a blank
if the string contains quote. I know that I can configure a softphone
(e.g., Xten) to display correctly, because it has a user id and a
display name. Anything similar in Asterisk?
Can post your zapata.conf?
You need to ensure Asterisk is sending the FSK signal at the right time.
This is from my zapata.conf:
signalling=fxo_ks
sendcalleridafter=2
usecallerid=yes
cidsignalling=bell
cidstart=ring
Leo
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
