I had a clone X100P (ordinary modem with Motorola chipsets) It works fine for me. My 2 cents: If you are just using that to learn the basics of Asterisk yes go on and continue, but for production purpose you should go with the TDM400P card from Digium.
Anyway I did not encounter any problem with my X100P. On 2/6/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Try to execute the command: lspci if the card is ok, you will found some informations such as: 01:00.0 Communication controller: Motorola: Unknown device 5608 or something likes tigerjet If you can't find them, I think you have to unplug the card and insert it to another pci slot. *Andrew D Kirch <[EMAIL PROTECTED]>* wrote: David Ruggles wrote: > I'm trying to set up a simple test box to start developing with Asterisk. > > I've got a Dell GX150 with two X100P cards. I've downloaded, printed out and > read through most of TFOT. I've also done a lot of Internet searching. > > I'm getting this error: > ZT_CHANCONFIG failed on channel 1: No such device or address (6) > > Based on the searching I've done, it seems like the problem must be shared > IRQ issues. I've gone in the BIOS and disabled everything I can but I can't > stop the sharing completely. One X100P is shared with the built-in video and > the other X100P is shared with a serial controller. (I disabled both serial > ports) > > My question is this: (in three parts) > > 1) Are my research and assumptions accurate? Does this seem to be an IRQ > issue? > 2) If I have to build another system to prevent the IRQ problem, can anyone > recommend hardware (just for a simple test box right now) > 3) Is it worth keeping the X100Ps or should I get a TDM400P like used in > TFOT, or something else? (again just for testing) > > If there are other things I should check first please let me know!! > > TIA!!!!! > > Thanks, > > David Ruggles > CCNA MCSE (NT) CNA A+ > Network Engineer Safe Data, Inc. > (910) 285-7200 [EMAIL PROTECTED] > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users The X100P is going to leave you fairly unsatisfied with your Asterisk experience. It lacks an on-card timing interface, and real X100P's haven't been made in quite awhile (several years). You may or may not get caller ID, you may or may not get two way audio. I know it's a bit more but you're better off with the TDM. Good luck! -- Andrew D Kirch | Abusive Hosts Blocking List | www.ahbl.org Security Admin | Summit Open Source Development Group | www.sosdg.org Key fingerprint = 4106 3338 1F17 1E6F 8FB2 8DFA 1331 7E25 C406 C8D2 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
