Andrew D Kirch wrote:
David Ruggles wrote:
I'm trying to set up a simple test box to start developing with Asterisk.
I've got a Dell GX150 with two X100P cards. I've downloaded, printed
out and
read through most of TFOT. I've also done a lot of Internet searching.
I'm getting this error:
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
Based on the searching I've done, it seems like the problem must be
shared
IRQ issues. I've gone in the BIOS and disabled everything I can but I
can't
stop the sharing completely. One X100P is shared with the built-in
video and
the other X100P is shared with a serial controller. (I disabled both
serial
ports)
My question is this: (in three parts)
1) Are my research and assumptions accurate? Does this seem to be an IRQ
issue?
2) If I have to build another system to prevent the IRQ problem, can
anyone
recommend hardware (just for a simple test box right now)
3) Is it worth keeping the X100Ps or should I get a TDM400P like used in
TFOT, or something else? (again just for testing)
If there are other things I should check first please let me know!!
TIA!!!!!
Thanks,
David Ruggles
CCNA MCSE (NT) CNA A+
Network Engineer Safe Data, Inc.
(910) 285-7200 [EMAIL PROTECTED]
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
The X100P is going to leave you fairly unsatisfied with your Asterisk
experience. It lacks an on-card timing interface, and real X100P's
haven't been made in quite awhile (several years). You may or may not
get caller ID, you may or may not get two way audio. I know it's a bit
more but you're better off with the TDM. Good luck!
I should note I committed two sins in this post.
1. Tzafrir, I didn't see your reply (blame my inability to use my mail
reader, and accept my humble apology)
2. the TDM400P comes with installation support from Digium, so you know
you're going to be able to get it working correctly.
--
Andrew D Kirch | Abusive Hosts Blocking List | www.ahbl.org
Security Admin | Summit Open Source Development Group | www.sosdg.org
Key fingerprint = 4106 3338 1F17 1E6F 8FB2 8DFA 1331 7E25 C406 C8D2
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
