Wireless wrote:
looks good.
9 says type
[EMAIL PROTECTED] ~]# modprobe zaptel
which returns nothing... when I run 10
At this point, if you run "dmesg", do you find the following in your
kernel log?
Digium High-Performance Echo Canceller, version 8.20
Optimized for "i386" CPU architecture
Coypright (C) 2006 Digium, Inc. and Adaptive Digital Technologies, Inc.
This module is supplied under a commercial license granted by Digium, Inc.
Please see the full license text supplied by the accompanying
"register" utility, or ask for a copy from Digium.
If not, you've probably not got Zaptel built with HPEC properly.
I'm truely stuck now, I cannot get HPEC to register with my Sangoma A200
card. I'm using
Asterisk 1.2.15
Zaptel 1.2.13
Wanpipe drivers / util 2.3.4-7
I'm just not seeing any mention of HPEC in dmesg and I have tried different
versions of the HPEC
i386, i586, i686 and pentium3m the physical proc is a P3 650Mhz running
CentOS 4.4 (Trixbox 2) I've rebuilt this box over the weekend from a fully
patched CentOS 4.4 (yum update) as the hard drive failed!
when I run ./register all seems ok then when I run ./zaphpec_enable it
reports: No valid licenses for HPEC found.
Any suggestions as to how I can debug what is not happening much appreciated
Before building Zaptel, you are grabbing the correct version of
hpec_x86_32.o_shipped for your CPU and putting it in zaptel-1.2.13/hpec/
right?
It sounds to me like you've either not done that correctly, or something
with the Sangoma build process is stopping the HPEC build working.
After building zaptel, run "strings zaptel.ko | grep 'High-Performance
Echo Canceller'" and see if you get a line like:
"Digium High-Performance Echo Canceller, version %s"
If not, you're going to need to dig into the way your Zaptel is being
built to see why the HPEC module is not being included.
Cheers,
Nic.
--
Nic Bellamy,
Head Of Engineering, Vadacom Ltd - http://www.vadacom.co.nz/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
