----- Original Message ----- From: "Nic Bellamy" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Monday, February 19, 2007 8:21 PM Subject: Re: [asterisk-users] The High Performance Echo Canceller (HPEC)
> Wireless wrote: > >>> looks good. > >>> > >>> 9 says type > >>> [EMAIL PROTECTED] ~]# modprobe zaptel > >>> > >>> which returns nothing... when I run 10 > >>> > >>> > >> At this point, if you run "dmesg", do you find the following in your > >> kernel log? > >> > >> Digium High-Performance Echo Canceller, version 8.20 > >> Optimized for "i386" CPU architecture > >> Coypright (C) 2006 Digium, Inc. and Adaptive Digital Technologies, Inc. > >> This module is supplied under a commercial license granted by Digium, Inc. > >> Please see the full license text supplied by the accompanying > >> "register" utility, or ask for a copy from Digium. > >> > >> If not, you've probably not got Zaptel built with HPEC properly. > >> > >> > > I'm truely stuck now, I cannot get HPEC to register with my Sangoma A200 > > card. I'm using > > Asterisk 1.2.15 > > Zaptel 1.2.13 > > Wanpipe drivers / util 2.3.4-7 > > > > I'm just not seeing any mention of HPEC in dmesg and I have tried different > > versions of the HPEC > > i386, i586, i686 and pentium3m the physical proc is a P3 650Mhz running > > CentOS 4.4 (Trixbox 2) I've rebuilt this box over the weekend from a fully > > patched CentOS 4.4 (yum update) as the hard drive failed! > > > > when I run ./register all seems ok then when I run ./zaphpec_enable it > > reports: No valid licenses for HPEC found. > > > > Any suggestions as to how I can debug what is not happening much appreciated > > > Before building Zaptel, you are grabbing the correct version of > hpec_x86_32.o_shipped for your CPU and putting it in zaptel-1.2.13/hpec/ > right? > > It sounds to me like you've either not done that correctly, or something > with the Sangoma build process is stopping the HPEC build working. > > After building zaptel, run "strings zaptel.ko | grep 'High-Performance > Echo Canceller'" and see if you get a line like: > > "Digium High-Performance Echo Canceller, version %s" > > If not, you're going to need to dig into the way your Zaptel is being > built to see why the HPEC module is not being included. > > Cheers, > Nic. > Hi Nic Thanks for that, it does indeed show "Digium High-Performance Echo Canceller, version %s", I've emailed Digium support but not sure if they will help me as I'm using the Sangoma card - here hoping :) Harvey _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users