22 feb 2007 kl. 21.02 skrev Bill Gibbs:
Ray,
I have been playing with OpenPBX. My core servers are Asterisk so
I was playing around with their T38Gateway application. Long story
short - I can get the ATA (behind NAT) to talk T38 to the rxfax app
on an OpenPBX server but the gateway feature of that product is
still under development so I was sending IAX calls to it and it
would try to talk T38 to my ATA (behind NAT or public IP) and
eventually the call would fail. Clearly T38 was working though,
debug output was full of T38 talk. However the wiki clearly states
it's experimental still.
I personally have decided to go with a 2nd PRI port to a 3660 I
have on hand that will do T38 SIP. I am going to set that up to
talk to * 1.4.0 and do T38 pass through. I to will be doing NAT
for the ATAs so...hopefully it will work. We shall see.
As I've stated a few times, T.38 passthrough is broken in 1.4.0.
Either use 1.4 from subversion or wait for 1.4.1.
/O
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
