The nature of the existing PABX to be interface is of prime importance. Before you say it will works, please check the latest postings.
> [EMAIL PROTECTED] wrote: >> And how would you be able to make a test telephone call with ISDN30 when you >> don't have an E1 >> link? You gonna have two asterisk box connected peer to peer and have the >> other as the master >> and >> the other as a slave. Or the other way of saying that your other asterisk >> box generates the >> signalling/framing while the other is the recipient? How would you be able >> to know for sure if >> this works? >> >> > The bottom line is that it will work if you get it configured properly. > Asterisk can be configured in many different E1 configurations. Having > a tech at the telco on the phone is helpful if thy can answer your > questions such as "Do you use CRC4 error correction?" > > Going through the motions of setting it up in a loopback test > environment is a very good idea so you will at least have some > experience and confidence. You will certainly learn things that you > didn't know, and will definitely be better off for it. > > The only way to know for sure it works is to make it work, and it will. > That should be your attitude. > > Thanks, > Steve Totaro > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
