Outbound calls on my Telus PRI aren't taking the Name portion of the callerID. I've looked at the logs, and it is being set (see below), but the PRI debug output doesn't show the name being sent anywhere. As a result, received calls always display from Unknown (or just the number). Is there some config that I've missed somewhere?
I'm running NI-1 (Telus says NI-2 doesn't support the name feature, so they've changed my link type). Version: Asterisk 1.2.14 svn rev 48468 Asterisk Log: Executing Set("SIP/304-091aafb8", "CALLERID(all)=Andrew<nnnnnnnnnn>") in new stack (I've replaced the digits with n). PRI debug shows: > Protocol Discriminator: Q.931 (8) len=42 > Call Ref: len= 2 (reference 4/0x4) (Originator) > Message type: SETUP (5) > [04 03 80 90 a2] > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) > Ext: 1 User information layer 1: u-Law (34) > [18 03 a9 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 ] > [6c 0c 21 80 nn nn nn nn nn nn nn nn nn nn] > Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number not screened (0) 'nnnnnnnnnn' ] >From zapata.conf: callerid=asreceived ;Sangoma A101 port 1 [slot:12 bus:0 span: 1] switchtype=ni1 context=from-zaptel overlapdial=yes facilityenable=yes group=0 signalling=pri_cpe channel => 1-23 Thanks! -- Andrew
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users