Greetings:
I did some quick searching of my history of this list, and I tried a quick
Google search as well, but perhaps someone on the list can quickly answer
this question. I have a very nicely working Asterisk system at home with
two Digium X100P FXO cards. When my SIP phones want to dial-out I have them
setup to grab the first analog card (Zap/1) with the following
extensions.conf segment:
==== snippet ====
; Outbound
exten => _9.,1,Dial(Zap/1/${EXTEN:1},90,Tt)
exten => _9.,2,Macro(fastbusy)
exten => _9.,102,Macro(fastbusy)
==== /snippet ====
Zap/1 and Zap/2 are analog phone lines. What is the best method of picking
an open line when someone tries to dial-out? i.e. if Zap/1 is in use how can
I instruct Asterisk to use Zap/2 and vice versa? I know complex methods of
making this happen, but I'm sure there is a very simple way to accomplish
this task.
Thanks.
--
Tony Kava
Network Administrator
Pottawattamie County, Iowa
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
