On Mon, 24 Nov 2003 11:45:17 -0600, Tony Kava wrote
> Greetings:
>
> I did some quick searching of my history of this list, and I
> tried a quick Google search as well, but perhaps someone on
> the list can quickly answer this question. I have a very
> nicely working Asterisk system at home with two Digium X100P
> FXO cards. When my SIP phones want to dial-out I have them
> setup to grab the first analog card (Zap/1) with the
> following extensions.conf segment:
>
> ==== snippet ====
>
> ; Outbound
> exten => _9.,1,Dial(Zap/1/${EXTEN:1},90,Tt)
> exten => _9.,2,Macro(fastbusy)
> exten => _9.,102,Macro(fastbusy)
>
> ==== /snippet ====
>
> Zap/1 and Zap/2 are analog phone lines. What is the best
> method of picking an open line when someone tries to dial-
> out? i.e. if Zap/1 is in use how can I instruct Asterisk to
> use Zap/2 and vice versa? I know complex methods of making
> this happen, but I'm sure there is a very simple way to accomplish
> this task.
>
> Thanks.
>
Try putting the channels in a group (IIRC just put a group=>1 in
zapata.conf before channel=> lines - I don't own any Digium hardware
though :( ) and replace Zap/1/ with Zap/g1/
Works for me with 2x Fritz PCI cards (i4l, as it mostly works and if
it ain't broken, don't fix it.. capi is on my schedule though..)
HTH,
Grzegorz Nosek
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
