Hi,
you also need mISDNuser.
After that make clean && make install you'll have access to chan_misdn.
Regards.
Pierre
Administrator TOOTAI wrote:
Hi list,
I installed a fresh Debian/Etch with Asterisk 1.4 and Zaptel 1.4 from
SVN for 2 Digium B410P card. I ran configure in Asterisk dir, went in
zaptel dir and: make, make install, make b410p. Everything is ok. Now I
want to compile Asterisk but can't activate the chan_misdn channel which
depends on -from menuselect- isdnnet(E), misdn(E), suppserv(E)
When I made the make b410p, all the misdn stuff was downloaded from
digium's ftp. Also, running /etc/init.d/misdn-init --scan show me the 2
cards I have, /etc/init.d/misdn-init --config prepare me the misdn.conf
and after a /etc/init.d/misdn-init start I see:
mISDN_dsp 191656 0
mISDN_capi 88716 0
mISDN_l2 34452 0
mISDN_l1 11036 0
mISDN_core 71360 6
mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1
kernelcapi 44576 2 mISDN_capi,capi
My questions: why Asterisk doesn't want to let me activate the misdn
channel? Is misdn ready for 1.4?
Thanks for any hint
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
