change dtmf to info on both * and in the handytone. ----- Original Message ----- From: "Senad Jordanovic" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 25, 2003 8:01 PM Subject: [Asterisk-Users] Handytone 286 - calling out
> Hi, > > Just received recently released Grandstream handytone 286 ATA for > testing. > > I can call ATA from any other extensions and conversations seems to be > of quite good quality. However placing calls from ATA is not possible at > all to any extensions. > After dialing there no indications of any kind from ATA at all. It just > "hangs in there". > > ATA is behind NAT, registers to an * with public IP with no problems and > it uses 1.0.4.17 firmware. Web config screen has detected "firewall/NAT > type is open Internet" as network firewall. > > Here is my sip.conf: > [2202] > callerid="HandyTone" <2202> > username=2202 > context=intern > qualify=500 > type=friend > secret=XXXXXX > host=dynamic > dtmfmode=inband > canreinvite=no > reinvite=no > disallow=all > allow=ulaw > allow=alaw > > Any suggestions/pointers will be appreciated. > > Ta > SJ > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
