Andrew Gillham wrote: > Senad Jordanovic wrote: > >> Hi, >> >> Just received recently released Grandstream handytone 286 ATA for >> testing. >> >> I can call ATA from any other extensions and conversations seems to >> be of quite good quality. However placing calls from ATA is not >> possible at all to any extensions. After dialing there no >> indications of any kind from ATA at all. It just "hangs in there". >> >> ATA is behind NAT, registers to an * with public IP with no problems >> and it uses 1.0.4.17 firmware. Web config screen has detected >> "firewall/NAT type is open Internet" as network firewall. >> >> >> > Are you able to use tcpdump on the asterisk box to capture traffic > from the ATA? Or Ethereal if you have X installed on the Linux box. > > It would be interesting to see if the ATA sends anything after you > dial the '1234#' sequence. > > On my Grandstream 101 phone I have not had any trouble placing calls. > I don't have the 'Outbound Proxy' field configured, and I re-ordered > the codec preferences as well. Other than that it is pretty much > stock with SIP server / user and authentication configured. > > -Andrew > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users
I have tested several GS 101s as well, and they worked. I will try to capture traffic, then we will see from there. Ta _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
