Dave Miller wrote:
Nitesh Divecha wrote on 5/1/07 10:28 AM:
Is it possible to have both Digium cards installed on one Server
(TDM400P and TE405P)?
I have one site which requires both connection POT and T1/E1.
How can I configure both cards?
Should work just fine. The Zaptel drivers will pick up both. Just be
forewarned, the T1/E1 channels will all get numbered before the POTS
channels, no matter what order they're on the bus, so 1-24 will be your
T1 and 25-28 the POTS, for example. (I think E1 goes to 32?)
Thanks Dave,
From the Asterisk CLI when I do "zap show status", I get: -
hyperion*CLI> zap show status
Description Alarms IRQ
bpviol CRC4
Wildcard TDM400P REV I Board 1 OK 0
0 0
T4XXP (PCI) Card 0 Span 1 OK 0
0 0
T4XXP (PCI) Card 0 Span 2 OK 0
0 0
T4XXP (PCI) Card 0 Span 3 OK 0
0 0
T4XXP (PCI) Card 0 Span 4 OK 0
0 0
hyperion*CLI>
Back of the cards I see four green lights on TDM400P, but no lights on
TE405P... And right now I tried calling in on POT lines and Asterisk is
not picking up the call...
Am I missing something here...?
Regards,
Nitesh
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
