The RTP traffic is not going to be on port 5060, that is the sip only. Check your rtp.conf file in asterisk for the port range used for RTP traffic.
On 5/1/07, CSB <[EMAIL PROTECTED]> wrote:
I want to capture all my Asterisk traffic (including RTP) and then analyse it. My plan was to use tcpdump and then analyse with Wireshark. The following works: tcpdump -i eth0 -s 0 -w /tmp/tcpdump.1 But I want to be a bit more selective: tcpdump -C 100 -W 10 -w /tmp/tcpdump -i eth1 -s 0 udp and dst port >= 5060 This doesn't capture the RTP traffic. Could anyone advise what I'm doing wrong or suggest a better way? Thanks Cameron _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- Bruce Reeves Nortex Networks
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
