Vieri,
Make sure you are loading the digital card first and then analog card.
I had the same problem and Digium engineers helped me out.
Cheers,
Nitesh
Vieri wrote:
--- David Gomillion <[EMAIL PROTECTED]> wrote:
On 5/21/07, Vieri <[EMAIL PROTECTED]> wrote:
Hi,
My asterisk server was working with a 4-FXO analog
card (TDM400P).
I recently added two digital cards: a TE120P (1
PRI)
and a B410P (4 BRI).
The B410P is still unconfigured but inserted in a
PCI
slot.
The TE120P's jumper is set to E1 as it will
connect to
a commercial PBX's PRI card also configured as E1.
My analog channels used to be 1-4 but since I
added
the new cards I changed them to 101-104.
I could be wrong here, but I don't think you get to
arbitrarily make up what
the channel numbers. At least I've never done that;
I let the first channel
be 1, second one 2, etc, through all of the cards,
based on loading order of
the PCI cards. And are you sure about the loading
order of the cards?
I'm sure you're right because the following yields no
error:
# misdn-init stop
# rmmod wctdm
# rmmod xpp
# rmmod wcte12xp
# rmmod zaptel
# modprobe -a zaptel
# modprobe -a wcte12xp
# ztcfg -vvvvv
Zaptel Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet
(DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
31 channels configured.
Changing signalling on channel 1 from Unused to Clear
channel
Changing signalling on channel 2 from Unused to Clear
channel
Changing signalling on channel 3 from Unused to Clear
channel
Changing signalling on channel 4 from Unused to Clear
channel
Changing signalling on channel 5 from Unused to Clear
channel
Changing signalling on channel 6 from Unused to Clear
channel
Changing signalling on channel 7 from Unused to Clear
channel
Changing signalling on channel 8 from Unused to Clear
channel
Changing signalling on channel 9 from Unused to Clear
channel
Changing signalling on channel 10 from Unused to Clear
channel
Changing signalling on channel 11 from Unused to Clear
channel
Changing signalling on channel 12 from Unused to Clear
channel
Changing signalling on channel 13 from Unused to Clear
channel
Changing signalling on channel 14 from Unused to Clear
channel
Changing signalling on channel 15 from Unused to Clear
channel
Changing signalling on channel 16 from Unused to HDLC
with FCS check
Changing signalling on channel 17 from Unused to Clear
channel
Changing signalling on channel 18 from Unused to Clear
channel
Changing signalling on channel 19 from Unused to Clear
channel
Changing signalling on channel 20 from Unused to Clear
channel
Changing signalling on channel 21 from Unused to Clear
channel
Changing signalling on channel 22 from Unused to Clear
channel
Changing signalling on channel 23 from Unused to Clear
channel
Changing signalling on channel 24 from Unused to Clear
channel
Changing signalling on channel 25 from Unused to Clear
channel
Changing signalling on channel 26 from Unused to Clear
channel
Changing signalling on channel 27 from Unused to Clear
channel
Changing signalling on channel 28 from Unused to Clear
channel
Changing signalling on channel 29 from Unused to Clear
channel
Changing signalling on channel 30 from Unused to Clear
channel
Changing signalling on channel 31 from Unused to Clear
channel
I guess I'll have trouble getting all three cards to
work together on the same box.
____________________________________________________________________________________
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/features_spam.html
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
