On 5/21/07, Vieri <[EMAIL PROTECTED]> wrote:
--- David Gomillion <[EMAIL PROTECTED]> wrote: > On 5/21/07, Vieri <[EMAIL PROTECTED]> wrote: > > > > Hi, > > > > My asterisk server was working with a 4-FXO analog > > card (TDM400P). > > > > I recently added two digital cards: a TE120P (1 > PRI) > > and a B410P (4 BRI). > > > > The B410P is still unconfigured but inserted in a > PCI > > slot. > > > > The TE120P's jumper is set to E1 as it will > connect to > > a commercial PBX's PRI card also configured as E1. > > > > My analog channels used to be 1-4 but since I > added > > the new cards I changed them to 101-104. > > > I could be wrong here, but I don't think you get to > arbitrarily make up what > the channel numbers. At least I've never done that; > I let the first channel > be 1, second one 2, etc, through all of the cards, > based on loading order of > the PCI cards. And are you sure about the loading > order of the cards? I'm sure you're right because the following yields no error: # misdn-init stop # rmmod wctdm # rmmod xpp # rmmod wcte12xp # rmmod zaptel # modprobe -a zaptel # modprobe -a wcte12xp # ztcfg -vvvvv <snip> I guess I'll have trouble getting all three cards to work together on the same box.
You should still be able to get all of the cards working together. Just be sure you define your channels in the right order.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
