Hi All,
I'm having problems trying to get a TE120P operational in Canada. I keep getting a congestion error when I try to make a call. I'm not sure if my switching, parity, etc is correct. I'm hoping that someone will be able to verify my config. The Telco is SaskTel, with a 10 channel 50 DDI service. Zap show channels show and ztcfg -vv looks ok and the zttool show the status as OK and we have a green light on the card. I'm not sure if the span line is correct. Any help would be greatly appreciated. /etc/zaptel.conf loadzone=us defaultzone=us span=1,1,0,ccs,hdb3,crc4 bchan=1-10 dchan=24 /etc/asterisk/Zapata.conf [trunkgroups] [channels] language=us context=sasktel switchtype=national signalling=pri_net ; I have also tried pri_cpe rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 channel=>1-10 callgroup=1 pickupgroup=1 immediate=no David Klaverstyn Systems Administrator Information Services, Asia-Pacific Intergraph Corporation Level 3, 299 Coronation Drive Milton, QLD 4064 AU P 61.7.3510.8951 F 61.7.3510.8901 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> , www.intergraph.com.au <http://www.intergraph.com.au>
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users