Hi, Gustavo: [EMAIL PROTECTED] wrote: > Hi all and thanks for every suggest about my problem, I found that my TDM400P > was sharing IRQ with onboard sound device using cat /proc/interrupts, lspci -v > and lspci -vb. When I disable all unnecessary hardware on my machine and test > it, clicking sounds continue on the line with the same intensity; again using > lspci -vb i found that: > > 01:00.0 VGA compatible controller: VIA Technologies, Inc. Unknown device 3230 > (rev 11) (prog-if 00 [VGA]) > Subsystem: Micro-Star International Co., Ltd. Unknown device 7253 > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 > Memory at c0000000 (32-bit, prefetchable) > Memory at dd000000 (32-bit, non-prefetchable) > Capabilities: [60] Power Management version 2 > Capabilities: [70] AGP version 3.0 > > 04:04.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN > interface > Subsystem: Unknown device b119:0003 > Flags: bus master, medium devsel, latency 64, IRQ 11 > I/O ports at be00 > Memory at dfaff000 (32-bit, non-prefetchable) > Capabilities: [40] Power Management version 2 > > Now TDM card share IRQ 11 with onboard vga controller. I have a sata raid 1 > level running on the box too and cat /proc/interrupts show me: > > 0: 23572057 0 IO-APIC-edge timer > 1: 196 0 IO-APIC-edge i8042 > 6: 3 0 IO-APIC-edge floppy > 7: 0 0 IO-APIC-edge parport0 > 8: 0 0 IO-APIC-edge rtc > 9: 0 0 IO-APIC-level acpi > 14: 66 0 IO-APIC-edge ide0 > 209: 3663990 0 IO-APIC-level eth0 > 217: 403070 0 IO-APIC-level libata > 225: 95602389 0 IO-APIC-level wctdm > NMI: 3824 180 > LOC: 23572106 23572083 > ERR: 0
You must ignore the IRQ flag in the lspci output when your system uses IO-APIC. Your /proc/interrupts doesn't seem to show a shared IRQ... are we sure this is the real cause of the problem? -Stephen- _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
