Here's what I'm showing in the logs... [Sep 18 09:52:09] VERBOSE[2786] logger.c: == Registered file format g729, extension(s) g729 [Sep 18 09:52:09] VERBOSE[2786] logger.c: format_g729.so => (Raw G729 data) [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: G.729 transcoding module version 32, Copyright (C) 1999-2007 Digium, Inc. [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: This module is supplied under a commercial license granted by Digium, Inc. [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: Please see the full license text supplied by the accompanying [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: "register" utility, or ask for a copy from Digium. [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: This product includes software developed by the OpenSSL Project [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: for use in the OpenSSL Toolkit. (http://www.openssl.org/) [Sep 18 09:52:09] NOTICE[2786] codec_g729.c: Copyright (C) 1998-2006 The OpenSSL Project [Sep 18 09:52:09] VERBOSE[2786] logger.c: == G.729 Host-ID: x:x:x:etc [Sep 18 09:52:09] WARNING[2786] codec_g729.c: Failed to initialize G.729 copy protection! [Sep 18 09:52:09] VERBOSE[2786] logger.c: codec_g729a.so => (Annex A/B (floating point) G.729 Codec (optimized for i686))
Any ideas where this points me? Thanks, Scott On 9/17/07, Scott Moseman <[EMAIL PROTECTED]> wrote: > > What's the best way to debug what's going on within Asterisk? > I turned up the 'core debug', but that did not give me what I was > hoping to find. I'm hoping to see some kind of error that explains > why it will not pass through the g729 codec. > > Thanks, > Scott > > > On 9/14/07, Scott Moseman <[EMAIL PROTECTED]> wrote: > > > > I have a fresh 1.4.10.1 installation that appears to have a problem > > with g729 pass-through. I can see the gateway in question sending > > an INVITE using g729b. However, the Asterisk is only sending g711 > > in the INVITE to my Polycom phone. > > > > [gateway] > > disallow=all > > allow=g729 > > > > [phone] > > disallow=all > > allow=ulaw > > allow=alaw > > allow=g729 > > > > There's the codec configs for the gateway and the phone in question. > > I even attempted to setup the phone with only the allow=g729, but in > > that instance it won't even complete the call. We had to add g711 > > support to the gateway in question for now to get it up and running, > > but we want to get it back to using only g729. > > > > CLI> show modules like g729 > > Module Description > > Use Count > > format_g729.so Raw G729 data > > 0 > > codec_g729a.so Annex A/B (floating point) G.729 Codec > > ( 0 > > 2 modules loaded > > > > I downloaded the pre-compiled g729 module from Digium. The sip.conf > > references g729 and the codec module is loaded. Unless there's > > anything else I need to do that I'm missing? > > > > Thanks, > > Scott > > > _______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users