Steve Totaro wrote: > Steve Edwards wrote: >> I have 12 T1's going into 3 servers, 4 in each into "Digium, Inc. Wildcard >> TE410P Quad-Span togglable E1/T1/J1 card 3.3v (rev 02)" cards. >> >> Each "group" of T1's have the primary D on 24 and the secondary D on 96. >> >> The first server (ts20) and the last server (ts22) can playback >> "demo-congrats" fine. The "middle" server (ts21) cannot -- just dead air. >> >> If I call via ZAP, dead air. If I call via IAX, I hear the file. >> >> I copied /etc/zaptel.conf, /etc/asterisk/*, >> /var/lib/asterisk/sounds/demo-congrats.gsm from ts20 to ts21 -- no joy. >> >> I have seen this in my system log file: >> >> Oct 2 18:41:49 WARNING[7477]: chan_zap.c:8087 zt_pri_error: [Span 0 >> D-Channel 0] PRI: !! Got reject for frame 95, but we have nothing -- >> resetting! >> >> I'm running asterisk-1.2.24, asterisk-addons-1.2.7, libpri-1.2.5, >> zaptel-1.2.20.1. >> >> "show channel zap/?," "zap show channel ?" appear identical between >> working and non-working systems both "on-hook" and "off-hook." >> >> Any clues or clues where to start looking? >> >> Thanks in advance, >> ------------------------------------------------------------------------ >> Steve Edwards [EMAIL PROTECTED] Voice: +1-760-468-3867 PST >> Newline Fax: +1-760-731-3000 >> >> >> > > Double check both zaptel.conf and zapata.conf and also call the telco to > make sure they have they have the same NFAS scheme on all T1s setup > correctly. Sometimes (let's face it, alot of times, the provider messes > something up). > > Also check that all of your T1 cables are plugged into the correct T1 > port. I have made that mistake myself when doing 28 T1s off a T3. I > got dead air just as you described.
Yes, if you are running NFAS, getting dead air on a call is a symptom of not having the logical span identifier correctly corresponding to the physical span you have plugged in (spanmap option in zapata.conf, IIRC). -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
