Witch interface are you using to send faxes, SIP, IAX, ZAP, MISDN,...,etc VoipCrazy
2007/10/17, Giedrius Augys <[EMAIL PROTECTED]>: > > CountryCode: 1 > AreaCode: 800 > FAXNumber: +3705203230 > LongDistancePrefix: 1 > InternationalPrefix: 011 > DialStringRules: etc/dialrules > ServerTracing: 0xFFF > SessionTracing: 0xFFF > RecvFileMode: 0600 > LogFileMode: 0600 > DeviceMode: 0600 > RingsBeforeAnswer: 1 > SpeakerVolume: off > GettyArgs: "-h %l dx_%s" > LocalIdentifier: "Giedrius Augys" > TagLineFont: etc/lutRS18.pcf > TagLineFormat: "Nuo %%l|%c|Page %%P of %%T" > MaxRecvPages: 200 > # > # > # Modem-related stuff: should reflect modem command interface > # and hardware connection/cabling (e.g. flow control). > # > ModemType: Class1 # use this to supply a hint > > # > # Enabling this will use the hfaxd-protocol to set Caller*ID > # > #ModemSetOriginCmd: AT+VSID="%s","%d" > > # > # If "glare" during initialization becomes a problem then take > # the modem off-hook during initialization, and then place it > # back on-hook when done. > # > #ModemResetCmds: "ATH1\nAT+VCID=1" # enables CallID display > #ModemReadyCmds: ATH0 > > Class1AdaptRecvCmd: AT+FAR=1 > Class1TMConnectDelay: 400 # counteract quick CONNECT > response > > # > # If you have trouble with V.17 receiving or sending, > # you may want to enable one of these, respectively. > # > #Class1RMQueryCmd: "!24,48,72,96" # enable this to disable V.17receiving > #Class1TMQueryCmd: "!24,48,72,96" # enable this to disable V.17sending > > # > # You'll likely want Caller*ID display (also displays DID) enabled. > # > ModemResetCmds: AT+VCID=1 # enables CallID display > > # > # The pty does not support changing parity. > # > PagerTTYParity: none > > # > # If you are "missing" Caller*ID data on some calls (but not all) > # and if you do not have adequate glare protection you may want to > # not answer based on RINGs, but rather enable the CallIDAnswerLength > # for NDID, disable AT+VCID=1 and do this: > # > #RingsBeforeAnswer: 0 > #ModemRingResponse: AT+VRID=1 > > # Uncomment DATE and TIME if you really want them, but you probably don't. > #CallIDPattern: "DATE=" > #CallIDPattern: "TIME=" > CallIDPattern: "NMBR=" > CallIDPattern: "NAME=" > CallIDPattern: "ANID=" > #CallIDPattern: "USER=" # username provided by call > #CallIDPattern: "PASS=" # password provided by call > #CallIDPattern: "CDID=" # DID context in call > CallIDPattern: "NDID=" > #CallIDAnswerLength: 4 > > > > > 2007/10/17, Jonn R Taylor <[EMAIL PROTECTED]>: > > > > Giedrius Augys wrote: > > > Hi, > > > I have problems with asterisk and hylafax+ iaxmodem. I can > > successfully > > > send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I > > > have problems: No carrier. This is hylafax log, maybe you can suggest > > > me where to find ... > > > > > > Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906 > > > Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 > > > Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906 COMMID > > > 000000041 DEVICE '/dev/ttyIAX0' FROM 'root < [EMAIL PROTECTED]>' USER root > > > Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING > > > Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r] > > > Oct 17 07:38:48.22: [22428]: --> [2:OK] > > > Oct 17 07:38:48.22 : [22428]: MODEM set XON/XOFF/FLUSH: input ignored, > > > output disabled > > > Oct 17 07:38:48.22: [22428]: DIAL 37052390906 > > > Oct 17 07:38: 48.22: [22428]: <-- [16:ATDT37052390906\r] > > > Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER] > > > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR > > > [2] No carrier detected > > > Oct 17 07:39: 30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR > > > [333] No carrier detected; too many attempts to dial > > > Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r] > > > Oct 17 07:39:31.86: [22428]: --> [2:OK] > > > Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF > > > Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow control > > > unchanged) > > > Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT > > (timeout 5) > > > Oct 17 07:39:31.86: [22428]: SESSION END > > > > > > > > > -- > > > Pagarbiai / Best Regards, > > > Giedrius Augys > > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > > > asterisk-users mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > Please post your iaxmodem config file. > > > > Jonn > > > > _______________________________________________ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > -- > Pagarbiai / Best Regards, > Giedrius Augys > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
