Roger, I think you should call your telco support and ask them if they receive your sizing and if they are sending the seize ack.
On Dec 14, 2007 5:57 AM, Roger C. Beraldi Martins <[EMAIL PROTECTED]> wrote: > Dears, > > Here is the logs when I put loglevel=255 on unicall.conf, I have use > max-wait = 10000 > > > [Dec 14 09:53:42] DEBUG[28143] chan_unicall.c: unicall_call called - 'g1' > [Dec 14 09:53:42] DEBUG[28143] chan_unicall.c: unicall_call caller id - > '3007' > [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Call > control(1) > [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Make call > [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Creating a > new call with CRN 32769 > [Dec 14 09:53:42] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 0001 -> > [1/DIALING /Seize /Idle ] > [Dec 14 09:53:42] VERBOSE[28143] logger.c: -- Called g1 > [Dec 14 09:53:42] NOTICE[28143] chan_unicall.c: Unicall/1 event Dialing > [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 > seize_ack_wait_expired > [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 R2 prot. > err. [1/DIALING /Seize /Idle ] cau > se 32776 - Seize ack timed out > [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 1001 -> > [1/IDLE /Idle /Idle ] > [Dec 14 09:53:53] NOTICE[28143] chan_unicall.c: Unicall/1 event Protocol > failure > [Dec 14 09:53:53] ERROR[28143] chan_unicall.c: Unicall/1 protocol error. > Cause 32776 > [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel > echo cancel > [Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: disabled echo cancellation on > channel 1 > [Dec 14 09:53:53] WARNING[28143] app_dial.c: Unable to forward voice or dtmf > [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel > gains > [Dec 14 09:53:53] WARNING[28143] chan_unicall.c: MFC/R2 UniCall/1 Channel > switching > [Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: Hangup: channel: 1 index = 0, > normal = 10, callwait = -1, thirdcall = -1 > [Dec 14 09:53:53] DEBUG[28143] chan_unicall.c: Updated conferencing on 1, > with 0 conference users > [Dec 14 09:53:53] VERBOSE[28143] logger.c: -- Hungup 'UniCall/1-1' > [Dec 14 09:53:53] VERBOSE[28143] logger.c: == Everyone is busy/congested > at this time (1:0/0/1) > [Dec 14 09:53:53] DEBUG[28143] app_macro.c: Executed application: Dial > > > Best Regards, > > > > -- > Atenciosamente, > > Roger C. Beraldi Martins > Fone: 41-8828-7068 > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- "Within C++, there is a much smaller and cleaner language struggling to get out." _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
