If I had ANY failed faxes I would here about it. Iaxmodem creates a log of its own, so when I get a connection that fails hylafax sends the failure to me. One of the things that I found is you need to add nojitterbuffer to the iaxmodem config file, only use g711, and you must have QOS enabled on your switches and/or a traffic shaper on your internet connection.
I have a remote office that uses an IAX trunk and I can fax between these to offices over the internet. I have both app_txfax and app_rxfax also setup on asterisk and can use any of them. We also have 1 linksys ata that has a networked brother printer/fax and we can send faxes from it to any of the fax services on our network or any PSTN number. Jonn -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Lytle Sent: Tuesday, January 01, 2008 2:56 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk 1.4 Fax Jonn R Taylor wrote: > I have it setup to email me any failed fax connections. Most of the faxes > come from remote offices, distributors and customers. > Same here, but HylaFAX won't send you any logs of attempts that haven't at least negotiated a fax transmission. Call comes in, tries to sync up several times and then hangs up. It gets logged, but doesn't get sent to the FaxMaster. You may want to check. Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety." _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
