On Thu, 2008-01-03 at 15:41 +0000, Raúl Gómez C. wrote: > I've just compiled and installed Asterisk 1.4.16 and when I try to run > "zap show" I get the message "No such command 'zap show'".
This usually happens when chan_zap.so won't load. The number one cause for this is a zapata.conf configuration problem. Here's a quick run-down on things to check: 1) Stop Asterisk 2) Run 'cat /proc/zaptel/*' and make sure the spans are in the order you want them in 3) Run 'ztcfg -vvv' and make sure the channel numbers and signaling look good. 4) Once you've got the zaptel side working, then go into zapata.conf and make sure the channel numbers and signaling are correct. 5) Start Asterisk 6) If you still have no zap commands, turn up the debug and verbosity levels and then unload and reload the module: CLI> core set verbose 9 CLI> core set debug 9 CLI> module unload chan_zap.so CLI> module load chan_zap.so Give that a whirl and let me know if that helps at all... -- Jared Smith Community Relations Manager Digium, Inc. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
