Have you tried to run the command "core show channeltypes"? If you don't see an entry for Zap, it's possible that the channel chan_zap failed to load for some reason. If this is the case, you should try to analize the asterisk log to see why the channel refused to load. It could be a configuration problem, for example.
Best regards, Tomás. On Jan 2, 2008 6:11 PM, Raúl Gómez C. <[EMAIL PROTECTED]> wrote: > Hi list, > > I've just compiled and installed Asterisk 1.4.16 and when I try to run > "zap show" I get the message "*No such command 'zap show'*". > > I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed > the latest wanpipe too. > > zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know > what's happening here!!! > > Any ideas??? > > Thanks in advance!! > > Note: Below are my zapata.conf and zaptel.conf files > > > ############ BEGIN ZAPATA.CONF ######## > ;autogenerated by /usr/local/sbin/config-zaptel do not hand edit > ;Zaptel Channels Configurations (zapata.conf) > ; > ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig > > [trunkgroups] > > [channels] > context=default > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > > immediate=no > > ;Sangoma A400 [slot:4 bus:16 span:1] > context=from-internal > group=1 > signalling = fxo_ks > channel => 1 > > context=from-internal > group=1 > signalling = fxo_ks > channel => 2 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 3 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 4 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 5 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 6 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 7 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 8 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 9 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 10 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 11 > > context=from-zaptel > group=0 > signalling = fxs_ks > channel => 12 > ############# END ZAPATA.CONF ###### > > ############# BEGIN ZAPTEL.CONF ###### > # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand > edit > # Zaptel Channels Configurations (zaptel.conf) > # > loadzone=us > defaultzone=us > > #Sangoma A400 [slot:4 bus:16 span:1] > fxoks=1 > fxoks=2 > fxsks=3 > fxsks=4 > fxsks=5 > fxsks=6 > fxsks=7 > fxsks=8 > fxsks=9 > fxsks=10 > fxsks=11 > fxsks=12 > ############ END ZAPTEL.CONF ####### > > -- > Raul > Linux Counter #156439 > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
