I am trying to configure a Polycom IP4000 for use with Asterisk 1.4.5 on a flat local network.
I followed the provisioning guides that I found on the Web, and I have the phone downloading bootrom.ld, sip.ld, and a bunch of configuration files. This all works properly. However, I receive the following error: NOTICE[27345]: chan_sip.c:14725 handle_request_register: Registration from '<sip:[EMAIL PROTECTED]>' failed for 'x.x.x.229' - Device does not match ACL I can place calls from the IP4000, but I cannot receive them: WARNING[27480]: app_dial.c:1106 dial_exec_full: Unable to create channel of type 'SIP' (cause 3 - No route to destination) Here are the relevant (IMHO) config sections. == sip.conf == [ip4000_1] [EMAIL PROTECTED] type=friend secret=password qualify=yes nat=no host=dynamic canreinvite=no == Polycom per-phone config on TFTP server == reg.1.displayName="207" reg.1.address="207" reg.1.label="207" reg.1.type="private" reg.1.lcs="" reg.1.thirdPartyName="" reg.1.auth.userId="ip4000_1" reg.1.auth.password="password" == Polycom company-wide config on TFTP server == server voIpProt.server.1.address="x.x.x.55"/> <SIP> <outboundProxy voIpProt.SIP.outboundProxy.address="x.x.x.55"/> </SIP> I've tried using x.x.x.55 as both the "proxy" value only, the "server" value only, and (in the given example) both. I also added the following to sip.conf, to no avail: deny=0.0.0.0/0.0.0.0 permit=x.x.x.0/255.255.255.0 Any ideas about what I've missed would be appreciated. Thanks. -- Kevin DeGraaf _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
