Try 'ip4000_1' instead of '207' for your address. CP
Kevin DeGraaf wrote: > I am trying to configure a Polycom IP4000 for use with Asterisk 1.4.5 on > a flat local network. > > I followed the provisioning guides that I found on the Web, and I have > the phone downloading bootrom.ld, sip.ld, and a bunch of configuration > files. This all works properly. > > However, I receive the following error: > > NOTICE[27345]: chan_sip.c:14725 handle_request_register: Registration > from '<sip:[EMAIL PROTECTED]>' failed for 'x.x.x.229' - Device does not match > ACL > > I can place calls from the IP4000, but I cannot receive them: > > WARNING[27480]: app_dial.c:1106 dial_exec_full: Unable to create channel > of type 'SIP' (cause 3 - No route to destination) > > Here are the relevant (IMHO) config sections. > > == sip.conf == > [ip4000_1] > [EMAIL PROTECTED] > type=friend > secret=password > qualify=yes > nat=no > host=dynamic > canreinvite=no > > == Polycom per-phone config on TFTP server == > reg.1.displayName="207" > reg.1.address="207" > reg.1.label="207" > reg.1.type="private" > reg.1.lcs="" > reg.1.thirdPartyName="" > reg.1.auth.userId="ip4000_1" > reg.1.auth.password="password" > > == Polycom company-wide config on TFTP server == > server voIpProt.server.1.address="x.x.x.55"/> > <SIP> > <outboundProxy voIpProt.SIP.outboundProxy.address="x.x.x.55"/> > </SIP> > > I've tried using x.x.x.55 as both the "proxy" value only, the "server" > value only, and (in the given example) both. > > I also added the following to sip.conf, to no avail: > > deny=0.0.0.0/0.0.0.0 > permit=x.x.x.0/255.255.255.0 > > Any ideas about what I've missed would be appreciated. Thanks. > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
