On Sat, Jan 05, 2008 at 01:18:18AM +0100, Jaap Winius wrote:
> Quoting Michiel van Baak <[EMAIL PROTECTED]>:
>
> >> I don't know about NL but in the UK, multiple ISDN2e lines have to be
> >> configured as bri_cpe_ptp not bri_cpe_ptmp. Have you tried this mode?
> >
> > It's the same here in .nl
>
> Interesting, but I would think this to be unnecessary in my case,
> since I have only one ISDN-BRI line. It's just that for some reason
> the software keeps loading both the zaphfc and vzaphfc modules, which
> makes it look like I have two lines. But even if I do configure the
> system with " signalling = bri_cpe_ptp", it makes no difference: all
> of the channels are still busy.
signalling = bri_cpe
(if you set in /etc/default/zaptel: ZAPBRI_SIGNALLING="bri"
you'll get that from genzaptelconf.
Anyway, either you use zaphfc or vzaphfc. The first one that loads takes
everything.
What do you see on /proc/interrupts ?
Which of those two modules you can't unload when Asterisk is running?
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL PROTECTED]
+972-50-7952406 mailto:[EMAIL PROTECTED]
http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
