Quoting Tzafrir Cohen <[EMAIL PROTECTED]>:
> What do you mean by "In Use"?
# cat /proc/zaptel/*
Span 1: ZTHFC1 "HFC-S PCI A Zaptel Driver card 0 [TE]" (MASTER) AMI/CCS
1 ZTHFC1/0/1 Clear (In use)
2 ZTHFC1/0/2 Clear (In use)
3 ZTHFC1/0/3 HDLCFCS (In use)
> When Asterisk runs, they are "(In use)" - by Asterisk.
I would hope so. I do see:
# asterisk -rx 'pri show spans'
PRI span 1/0: Provisioned, Up, Active
and
# asterisk -rx 'zap show channels'
Chan Extension Context Language MOH Interpret
pseudo isdn-in en default
1 isdn-in en default
2 isdn-in en default
This is when I use the vzaphfc modules. However, any attempt to dial
out via ISDN results in errors like:
-- Executing [EMAIL PROTECTED]:1] Dial("SIP/1000-081f3220",
"Zap/g0/[EMAIL PROTECTED]||r") in new stack
[Jan 11 00:12:15] WARNING[1354]: app_dial.c:1130 dial_exec_full:
Unable to create channel of type 'Zap' (cause 34 - Circuit/channel
congestion)
== Everyone is busy/congested at this time (1:0/1/0)
== Auto fallthrough, channel 'SIP/1000-081f3220' status is 'CONGESTION'
[Jan 11 00:12:15] NOTICE[1354]: cdr.c:434 ast_cdr_free: CDR on channel
'SIP/1000-081f3220' not posted
In this case, the rule that I use in extensions.conf for dialing out is:
exten => _X.,1,Dial(Zap/g0/[EMAIL PROTECTED],,r)
> signalling=bri_cpe
I've tried that, but unless I'm doing something else wrong
(hopefully), using "signalling=bri_cpe" instead of
"signalling=bri_cpe_ptmp" makes no difference.
Thanks,
Jaap
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
