Steve Totaro wrote: > On Thu, Mar 20, 2008 at 3:01 PM, RE Kushner List Account <[EMAIL PROTECTED]> > wrote: > >> Al Baker wrote: >> > Quote" >> > >> > This code is pre-Asterisk 1.0... It processes quite a few calls daily, I >> > have about 1,800 DID numbers pointed at it, " >> > >> > Are you SURE on that figure. Since you cold have at MOST 4 T1's coming >> into that box, 1,800 DIDs pointing to it sems like >> > one hell of a congestion problem and a Dialplan thicker than War and Peace >> > >> > >> I said DID numbers, they point to a PRI trunk group to a T400P, then the >> calls go IAX2 to other boxes for processing based on NPA/NXX. >> >> IE: exten=>_906586XXXX,1,Dial,IAX2/un:[EMAIL PROTECTED]/[EMAIL PROTECTED] >> >> And if anything comes in for something not configured this catches it >> >> exten => _NXXXXXXXXX,1,Dial,sip/sipdebug/s >> >> If you figure standard telco usage patters, 92 channels @ 25:1 ratio, I >> have quite a bit of headroom. >> >> >> >> -Ron >> >> > > You don't run into choppy audio with IAX that way? I see that alot > and the simple solution is to switch to SIP, almost always solves the > problem right away. >
Not really, but both ends have zaptel hardware. I'm really surprised IAX2 connects and functions to these 1.4 and 1.6 beta servers from a Pre 1.0 machine. -Ron _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
