First off, here is what I want to do:
SIP Clients -> SER -> Asterisk -> VoIP provider
Where SER will handle communications between SIP
clients (since I would prefer that my SIP clients not
use all of my bandwidth)
Asterisk will handle calls to a VoIP provider
I have read that people have similar setups working,
but I have not seen any documentation of these setups.
So far, SIP Clients can talk to each other.
I can also start a call through Asterisk to a VoIP
provider, but there is a problem after the first ring:
Here is the output:
-- Executing Dial("SIP/-08114560",
"SIP/[EMAIL PROTECTED]") in new stack
-- Called [EMAIL PROTECTED]
-- SIP/SIPprovider-5e0c is making progress passing it
to SIP/-08114560
-- SIP/SIPprovider-5e0c answered SIP/-08114560
-- Attempting native bridge of SIP/-08114560 and
SIP/SIPprovider-5e0c
I have tried this with my SIP client behind a NAT and
outside of a NAT, so I don't that is the problem.
I have also tried this with both IAX and SIP providers
and the problem is the same. One ring, and then
silence.
Any thoughts?
Thank you for your time.
__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
