Alright guys and gals, I'm a little lost, I'm primarily a SIP/IAX based guy, and have ended up with a Zap installation. Everything was fine with our old provider when we were using PRI, but the new provider screwed up on provisioning and we've been temporarily stuck with a pair of EM Wink T's. Ever since then, we've been dropping 1-2% of all calls (in or out) and even more strange, when a call gets dropped, a phantom call was being generated on the incoming side, but only by Asterisk, the T providers (Qwest) say they have no records of those calls.
So, my question to you is, has anyone else dealt with a EM Wink T before using Asterisk, if so did you experience problems similar to this, and finally, if so how did you deal with it? Here's an outline of our system specs: Dual 2.3Ghz Athlon 2GB RAM Asterisk 1.4.16 (Tried 1.4.19 as well) Zaptel 1.4.10 51 Zap phones connected via SEPARATE TE407 and channel bank 2 EM_W T1's connected via TE407 25 SIP Phones All calls are being recorded by the Monitor() application, there is no timeout on the dial command, I can find NOTHING in the system config that would instruct Asterisk to dump the call. I have spoken with the Qwest technicians who have pulled their call records, and they report that we "disconnected the call".... Any ideas, thoughts? I've reviewed the verbose (full setting, writing to file) and see that the far end channel disconnects, and then the near end goes into TIMEOUT. I've watched full debug output as well, from file, cannot find ANYTHING... Thanks for any help, Sherwood McGowan _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
