Hi, I am using an older Fedora - FC2 and trying to install zaptel.(for X100P card I have - FXO with one line port and one Phone port)
Fist I tried installin from RPM...as given here (also tried installing Zapata) http://www.voip-info.org/wiki/view/Asterisk+Linux+Fedora (FC2 is at the end) But looks like zaptel executable was not there...same for zapata... Then I started on downloading the source, I successfully completed MAKE for zaptel...but make install has following error...Full o/p follows: ========================================================= [EMAIL PROTECTED] zaptel]# make install make[1]: Entering directory `/usr/src/zaptel' make -C /lib/modules/2.6.10-1.771_FC2/build ARCH=i386 SUBDIRS=/usr/src/zaptel/kernel HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="pciradio.o tor2.o torisa.o wcfxo.o wct1xxp.o wctdm.o wcte11xp.o wcusb.o zaptel.o ztd-eth.o ztd-loc.o ztdummy.o ztdynamic.o zttranscode.o wct4xxp/ wctc4xxp/ xpp/ wctdm24xxp/ wcte12xp/" modules make[2]: Entering directory `/lib/modules/2.6.10-1.771_FC2/build' Building modules, stage 2. MODPOST *** Warning: "class_device_destroy" [/usr/src/zaptel/kernel/zaptel.ko] undefined! make[2]: Leaving directory `/lib/modules/2.6.10-1.771_FC2/build' make[2]: Entering directory `/usr/src/zaptel/kernel/xpp/utils' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/src/zaptel/kernel/xpp/utils' make[1]: Leaving directory `/usr/src/zaptel' install -d /etc/udev/rules.d build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules build_tools/uninstall-modules dahdi 2.6.10-1.771_FC2 make -C /lib/modules/2.6.10-1.771_FC2/build ARCH=i386 SUBDIRS=/usr/src/zaptel/kernel HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="pciradio.o tor2.o torisa.o wcfxo.o wct1xxp.o wctdm.o wcte11xp.o wcusb.o zaptel.o ztd-eth.o ztd-loc.o ztdummy.o ztdynamic.o zttranscode.o wct4xxp/ wctc4xxp/ xpp/ wctdm24xxp/ wcte12xp/" INSTALL_MOD_PATH= INSTALL_MOD_DIR=misc modules_install make[1]: Entering directory `/lib/modules/2.6.10-1.771_FC2/build' INSTALL /usr/src/zaptel/kernel/pciradio.ko INSTALL /usr/src/zaptel/kernel/tor2.ko INSTALL /usr/src/zaptel/kernel/torisa.ko INSTALL /usr/src/zaptel/kernel/wcfxo.ko INSTALL /usr/src/zaptel/kernel/wct1xxp.ko INSTALL /usr/src/zaptel/kernel/wct4xxp/wct4xxp.ko INSTALL /usr/src/zaptel/kernel/wctc4xxp/wctc4xxp.ko INSTALL /usr/src/zaptel/kernel/wctdm.ko INSTALL /usr/src/zaptel/kernel/wctdm24xxp/wctdm24xxp.ko INSTALL /usr/src/zaptel/kernel/wcte11xp.ko INSTALL /usr/src/zaptel/kernel/wcte12xp/wcte12xp.ko INSTALL /usr/src/zaptel/kernel/wcusb.ko INSTALL /usr/src/zaptel/kernel/xpp/xpd_fxo.ko INSTALL /usr/src/zaptel/kernel/xpp/xpd_fxs.ko INSTALL /usr/src/zaptel/kernel/xpp/xpd_pri.ko INSTALL /usr/src/zaptel/kernel/xpp/xpp.ko INSTALL /usr/src/zaptel/kernel/xpp/xpp_usb.ko INSTALL /usr/src/zaptel/kernel/zaptel.ko INSTALL /usr/src/zaptel/kernel/ztd-eth.ko INSTALL /usr/src/zaptel/kernel/ztd-loc.ko INSTALL /usr/src/zaptel/kernel/ztdummy.ko INSTALL /usr/src/zaptel/kernel/ztdynamic.ko INSTALL /usr/src/zaptel/kernel/zttranscode.ko make[1]: Leaving directory `/lib/modules/2.6.10-1.771_FC2/build' [ `id -u` = 0 ] && /sbin/depmod -a 2.6.10-1.771_FC2 || : make[1]: Entering directory `/usr/src/zaptel/kernel/xpp/utils' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/zaptel/kernel/xpp/utils' make[1]: Entering directory `/usr/src/zaptel/kernel/xpp/utils' install -d /usr/sbin install genzaptelconf fpga_load zt_registration xpp_sync lszaptel xpp_blink zapconf zaptel_hardware /usr/sbin/ install -d /usr/share/zaptel install -m 644 ../firmwares/FPGA_1141.hex ../firmwares/FPGA_1151.hex ../firmwares/FPGA_FXS.hex ../firmwares/USB_FW.hex init_fxo_modes /usr/share/zaptel/ install ../init_card_1_30 ../init_card_2_30 ../init_card_3_30 ../init_card_4_30 xpp_fxloader /usr/share/zaptel/ install -d /usr/share/man/man8 install -m 644 genzaptelconf.8 fpga_load.8 zt_registration.8 xpp_sync.8 lszaptel.8 xpp_blink.8 zapconf.8 zaptel_hardware.8 /usr/share/man/man8/ install -d /etc/hotplug/usb install -m 644 xpp_fxloader.usermap /etc/hotplug/usb/ # for backward compatibility and for hotplug users: ln -sf /usr/share/zaptel/xpp_fxloader /etc/hotplug/usb/ install -d /etc/udev/rules.d install -m 644 xpp.rules /etc/udev/rules.d/ install -d /usr/lib/perl5/site_perl/5.8.3 for i in Zaptel Zaptel/Xpp Zaptel/Config Zaptel/Hardware; \ do \ install -d "/usr/lib/perl5/site_perl/5.8.3/$i"; \ done for i in Zaptel.pm Zaptel/Chans.pm Zaptel/Hardware.pm Zaptel/Span.pm Zaptel/Utils.pm Zaptel/Xpp.pm Zaptel/Xpp/Line.pm Zaptel/Xpp/Xbus.pm Zaptel/Xpp/Xpd.pm Zaptel/Config/Defaults.pm Zaptel/Hardware/PCI.pm Zaptel/Hardware/USB.pm; \ do \ install -m 644 "zconf/$i" "/usr/lib/perl5/site_perl/5.8.3/$i"; \ done make[1]: Leaving directory `/usr/src/zaptel/kernel/xpp/utils' install -d /sbin install fxotune ztcfg ztmonitor ztspeed zttest ztscan zttool /sbin/ install -d /usr/share/man/man8 install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 doc/ztspeed.8 doc/zttest.8 doc/ztscan.8 doc/zttool.8 /usr/share/man/man8/ /usr/bin/install -c -D -m 755 libtonezone.a /usr/lib/libtonezone.a /usr/bin/install -c -D -m 755 libtonezone.so /usr/lib/libtonezone.so.1.0 if [ `id -u` = 0 ]; then \ /sbin/ldconfig || : ;\ fi rm -f /usr/liblibtonezone.so /bin/ln -sf libtonezone.so.1.0 \ /usr/lib/libtonezone.so.1 /bin/ln -sf libtonezone.so.1.0 \ /usr/lib/libtonezone.so /sbin/restorecon -v /usr/lib/libtonezone.so /usr/bin/install -c -D -m 644 kernel/zaptel.h /usr/include/zaptel/zaptel.h /usr/bin/install -c -D -m 644 tonezone.h /usr/include/zaptel/tonezone.h make -C firmware hotplug-install DESTDIR= HOTPLUG_FIRMWARE=yes make[1]: Entering directory `/usr/src/zaptel/firmware' make[1]: *** No rule to make target `zaptel-fw-oct6114-128-1.05.01.tar.gz', needed by `hotplug-install'. Stop. make[1]: Leaving directory `/usr/src/zaptel/firmware' make: *** [install-firmware] Error 2 You have new mail in /var/spool/mail/root ============================================================== Any ideas would be appreciated on how to fix this.... Thx, Jay
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
