Which versions of Zaptel have you tried to build? PaulH
Jay Ray wrote: > Any ideas, please they are highly appreciated.... > > --- On *Mon, 8/4/08, Jay Ray /<[EMAIL PROTECTED]>/* wrote: > > From: Jay Ray <[EMAIL PROTECTED]> > Subject: [asterisk-users] FC2 and Zaptel > To: [email protected] > Date: Monday, August 4, 2008, 12:02 AM > > Hi, > > I am using an older Fedora - FC2 and trying to install > zaptel.(for X100P card I have - FXO with one line port and one > Phone port) > > Fist I tried installin from RPM...as given here (also tried > installing Zapata) > http://www.voip-info.org/wiki/view/Asterisk+Linux+Fedora (FC2 is > at the end) > > But looks like zaptel executable was not there...same for zapata... > > Then I started on downloading the source, I successfully completed > MAKE for zaptel...but make install has following error...Full o/p > follows: > ========================================================= > [EMAIL PROTECTED] zaptel]# make install > make[1]: Entering directory `/usr/src/zaptel' > make -C /lib/modules/2.6.10-1.771_FC2/build ARCH=i386 > SUBDIRS=/usr/src/zaptel/kernel HOTPLUG_FIRMWARE=yes > KBUILD_OBJ_M="pciradio.o tor2.o torisa.o wcfxo.o wct1xxp.o wctdm.o > wcte11xp.o wcusb.o zaptel.o ztd-eth.o ztd-loc.o ztdummy.o > ztdynamic.o zttranscode.o wct4xxp/ wctc4xxp/ xpp/ wctdm24xxp/ > wcte12xp/" modules > make[2]: Entering directory `/lib/modules/2.6.10-1.771_FC2/build' > > Building modules, stage 2. > MODPOST > *** Warning: "class_device_destroy" > [/usr/src/zaptel/kernel/zaptel.ko] undefined! > make[2]: Leaving directory `/lib/modules/2.6.10-1.771_FC2/build' > make[2]: Entering directory `/usr/src/zaptel/kernel/xpp/utils' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/usr/src/zaptel/kernel/xpp/utils' > make[1]: Leaving directory `/usr/src/zaptel' > install -d /etc/udev/rules.d > build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules > build_tools/uninstall-modules dahdi 2.6.10-1.771_FC2 > make -C /lib/modules/2.6.10-1.771_FC2/build ARCH=i386 > SUBDIRS=/usr/src/zaptel/kernel HOTPLUG_FIRMWARE=yes > KBUILD_OBJ_M="pciradio.o tor2.o torisa.o wcfxo.o wct1xxp.o wctdm.o > wcte11xp.o wcusb.o zaptel.o ztd-eth.o ztd-loc.o ztdummy.o > ztdynamic.o zttranscode.o wct4xxp/ wctc4xxp/ xpp/ wctdm24xxp/ > wcte12xp/" INSTALL_MOD_PATH= INSTALL_MOD_DIR=misc modules_install > make[1]: Entering directory `/lib/modules/2.6.10-1.771_FC2/build' > INSTALL /usr/src/zaptel/kernel/pciradio.ko > INSTALL /usr/src/zaptel/kernel/tor2.ko > INSTALL /usr/src/zaptel/kernel/torisa.ko > INSTALL /usr/src/zaptel/kernel/wcfxo.ko > INSTALL /usr/src/zaptel/kernel/wct1xxp.ko > INSTALL /usr/src/zaptel/kernel/wct4xxp/wct4xxp.ko > INSTALL /usr/src/zaptel/kernel/wctc4xxp/wctc4xxp.ko > INSTALL /usr/src/zaptel/kernel/wctdm.ko > INSTALL /usr/src/zaptel/kernel/wctdm24xxp/wctdm24xxp.ko > INSTALL /usr/src/zaptel/kernel/wcte11xp.ko > INSTALL /usr/src/zaptel/kernel/wcte12xp/wcte12xp.ko > INSTALL /usr/src/zaptel/kernel/wcusb.ko > INSTALL /usr/src/zaptel/kernel/xpp/xpd_fxo.ko > INSTALL /usr/src/zaptel/kernel/xpp/xpd_fxs.ko > INSTALL /usr/src/zaptel/kernel/xpp/xpd_pri.ko > INSTALL /usr/src/zaptel/kernel/xpp/xpp.ko > INSTALL /usr/src/zaptel/kernel/xpp/xpp_usb.ko > INSTALL /usr/src/zaptel/kernel/zaptel.ko > INSTALL /usr/src/zaptel/kernel/ztd-eth.ko > INSTALL /usr/src/zaptel/kernel/ztd-loc.ko > INSTALL /usr/src/zaptel/kernel/ztdummy.ko > INSTALL /usr/src/zaptel/kernel/ztdynamic.ko > INSTALL /usr/src/zaptel/kernel/zttranscode.ko > make[1]: Leaving directory `/lib/modules/2.6.10-1.771_FC2/build' > [ `id -u` = 0 ] && /sbin/depmod -a 2.6.10-1.771_FC2 || : > make[1]: Entering directory `/usr/src/zaptel/kernel/xpp/utils' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/usr/src/zaptel/kernel/xpp/utils' > make[1]: Entering directory `/usr/src/zaptel/kernel/xpp/utils' > install -d /usr/sbin > install genzaptelconf fpga_load zt_registration xpp_sync lszaptel > xpp_blink zapconf zaptel_hardware /usr/sbin/ > install -d /usr/share/zaptel > install -m 644 ../firmwares/FPGA_1141.hex > ../firmwares/FPGA_1151.hex ../firmwares/FPGA_FXS.hex > ../firmwares/USB_FW.hex init_fxo_modes /usr/share/zaptel/ > install ../init_card_1_30 ../init_card_2_30 ../init_card_3_30 > ../init_card_4_30 xpp_fxloader /usr/share/zaptel/ > install -d /usr/share/man/man8 > install -m 644 genzaptelconf.8 fpga_load.8 zt_registration.8 > xpp_sync.8 lszaptel.8 xpp_blink.8 zapconf.8 zaptel_hardware.8 > /usr/share/man/man8/ > install -d /etc/hotplug/usb > install -m 644 xpp_fxloader.usermap /etc/hotplug/usb/ > # for backward compatibility and for hotplug users: > ln -sf /usr/share/zaptel/xpp_fxloader /etc/hotplug/usb/ > install -d /etc/udev/rules.d > install -m 644 xpp.rules /etc/udev/rules.d/ > install -d /usr/lib/perl5/site_perl/5.8.3 > for i in Zaptel Zaptel/Xpp Zaptel/Config Zaptel/Hardware; \ > do \ > install -d "/usr/lib/perl5/site_perl/5.8.3/$i"; \ > done > for i in Zaptel.pm Zaptel/Chans.pm Zaptel/Hardware.pm > Zaptel/Span.pm Zaptel/Utils.pm Zaptel/Xpp.pm Zaptel/Xpp/Line.pm > Zaptel/Xpp/Xbus.pm Zaptel/Xpp/Xpd.pm Zaptel/Config/Defaults.pm > Zaptel/Hardware/PCI.pm Zaptel/Hardware/USB.pm; \ > do \ > install -m 644 "zconf/$i" > "/usr/lib/perl5/site_perl/5.8.3/$i"; \ > done > make[1]: Leaving directory `/usr/src/zaptel/kernel/xpp/utils' > install -d /sbin > install fxotune ztcfg ztmonitor ztspeed zttest ztscan zttool /sbin/ > install -d /usr/share/man/man8 > install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 > doc/ztspeed.8 doc/zttest.8 doc/ztscan.8 doc/zttool.8 > /usr/share/man/man8/ > /usr/bin/install -c -D -m 755 libtonezone.a /usr/lib/libtonezone.a > /usr/bin/install -c -D -m 755 libtonezone.so > /usr/lib/libtonezone.so.1.0 > if [ `id -u` = 0 ]; then \ > /sbin/ldconfig || : ;\ > fi > rm -f /usr/liblibtonezone.so > /bin/ln -sf libtonezone.so.1.0 \ > /usr/lib/libtonezone.so.1 > /bin/ln -sf libtonezone.so.1.0 \ > /usr/lib/libtonezone.so > /sbin/restorecon -v /usr/lib/libtonezone.so > /usr/bin/install -c -D -m 644 kernel/zaptel.h > /usr/include/zaptel/zaptel.h > /usr/bin/install -c -D -m 644 tonezone.h > /usr/include/zaptel/tonezone.h > make -C firmware hotplug-install DESTDIR= HOTPLUG_FIRMWARE=yes > make[1]: Entering directory `/usr/src/zaptel/firmware' > make[1]: *** No rule to make target > `zaptel-fw-oct6114-128-1.05.01.tar.gz', needed by > `hotplug-install'. Stop. > make[1]: Leaving directory `/usr/src/zaptel/firmware' > make: *** [install-firmware] Error 2 > You have new mail in /var/spool/mail/root > ============================================================== > > Any ideas would be appreciated on how to fix this.... > > Thx, > Jay > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
