[Asterisk-Users] E100P pinouts anyone?

[bam]

I'm trying to hookup an E100P to an E1 PRI that I know is working, it 
drives an Ascend Max happily. The E100P has a red LED flashing away slowly 
and the telco switch reports that there is no level one signalling link.

So that I can rule out the obvious things does anyone have the pinouts for 
the RJ45 on the E100P? I've tried straight through and crossover to no avail.

I get a couple of errors on modprobing the driver, but if I reverse the 
order it seems to load OK. ztcfg is happy and zttool seems to see the card 
so I'm pretty certain it is something silly.

any help gratefully received.

Brian

[EMAIL PROTECTED] root]# modprobe zaptel
[EMAIL PROTECTED] root]# modprobe wct1xxp
ZT_CHANCONFIG failed on channel 32: No such device or address (6)
/lib/modules/2.4.20-24.9/misc/wct1xxp.o: post-install wct1xxp failed
/lib/modules/2.4.20-24.9/misc/wct1xxp.o: insmod wct1xxp failed
[EMAIL PROTECTED] root]# modprobe wcfxs
[EMAIL PROTECTED] root]# modprobe wct1xxp
[EMAIL PROTECTED] root]#
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users