I don't know what Eric is talking about. My advice applies to T1 PRI as does the rest as far as I care to read.
Thanks, Steve Totaro On Mon, Sep 8, 2008 at 10:56 AM, Amaru Netapshaak <[EMAIL PROTECTED]> wrote: > Eric, > > So what is practical for a PRI then? > > Thank you!!! > > ++Amaru > > --- On Fri, 9/5/08, Eric "ManxPower" Wieling <[EMAIL PROTECTED]> wrote: > > From: Eric "ManxPower" Wieling <[EMAIL PROTECTED]> > Subject: Re: [asterisk-users] FAX over T1 Question > To: [EMAIL PROTECTED], "Asterisk Users Mailing List - Non-Commercial > Discussion" <[email protected]> > Date: Friday, September 5, 2008, 10:04 PM > > The thing is, you are doing FAX over PRI, not FAX over T-1 (which to me > implies Channelized T-1). Seems like most people gave you advice that > might apply to a Channelized T-1, but would not apply or be practical > for a PRI. > > Amaru Netapshaak wrote: >> Bob, >> > >> I should have added that I have disabled hardware EC on the T1 ports. >> >> Here is a sample of my zapata.conf -- channels 1-23 are my incoming PRI. >> This PRI handles both Voice AND FAX calls. Having the hardware EC >> disabled makes for poor voice communications, and im looking for a way to >> enable/disable EC per the call type. I understand that > "echoncancelwhenbridged" >> and Zapata should be telling my A104d to enable/disable HWEC > automatically. >> >> Channel 25 is the first FXS port on my Rhino CB. It has a FAX directly >> attached to it. >> >> [channels] >> language = en >> switchtype = national >> signalling = pri_cpe >> pridialplan = national >> prilocaldialplan = national >> faxdetect = both >> echotraining = no >> echocancel > = 256 >> echocancelwhenbridged = no >> relaxdtmf = yes >> overlapdial = no >> usecallingpres = yes >> amaflags = default >> context = default >> group = 1 >> channel => 1-23 >> >> signalling = fxo_ls >> faxdetect = both >> echotraining = no >> echocancel = no >> echocancelwhenbridged = no >> relaxdtmf = yes >> context = default >> callerid = "FAX" <1112222> >> channel => 25 >> >> Thanks for your assistance everyone! >> >> >> >> --- On Fri, 9/5/08, Bob Pierce <[EMAIL PROTECTED]> wrote: >> From: Bob Pierce <[EMAIL PROTECTED]> >> Subject: Re: [asterisk-users] FAX over > T1 Question >> To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <[email protected]> >> Date: Friday, September 5, 2008, 4:43 PM >> >> On Fri, 2008-09-05 at 09:19 -0700, Amaru Netapshaak wrote: >>> I have a Sangoma A104d T1 card, a Rhino 24-port FXS box, and am >>> running >>> Asterisk 1.4.21.2 >> >> I think you're mostly right on this setup, but I wonder if your A104d > is >> doing some hardware echo cancellation on these calls. If I'm not >> mistaken, that can mess up fax machine communications. >> >> Bob >> >> >> >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> AstriCon 2008 - September 22 - 25 > Phoenix, Arizona >> Register Now: http://www.astricon.net >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > -- > Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN, QoS, > T-1, PRI, Frame Relay, Linux, and network design. Based near > Birmingham, AL. Now accepting clients worldwide. > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
