|
Hi, I have a 10 line PRI E1 ISDN service from AAPT. Connected to Asterisk 1.4 via a Digium TE121P. All oubound calls work fine. Inbound works only if I Dial a SIP phone directly or as the first step. This phone MUST NOT be busy or else the call will fail. eg. This works: [from-pstn] exten => _34397333,1,Dial(SIP/511,30) exten => _34397333,n,Hangup This also works: exten => _34397333,1,Dial(SIP/511,2) exten => _34397333,n,GoTo(ConfMe,s,1) exten => _34397333,n,Hangup This does not work: exten => _34397333,1,GoTo(ConfMe,s,1) exten => _34397333,n,Hangup [ConfMe] exten => s,1,Answer exten => s,n,MeetMe(9000|crM|) exten => s,n,Playback(vm-goodbye) exten => s,n,Hangup Below I have included the PRI debug output for a successful and failed inbound call. But first I have done a break down of the messages received for both failed and successful calls. Failed: Message type: SETUP (5) Message type: CALL PROCEEDING (2) Message type: CONNECT (7) Message type: STATUS (125) Message type: STATUS (125) Message type: SETUP (5) Message type: DISCONNECT (69) Message type: RELEASE (77) Message type: RELEASE COMPLETE (90) Successful: Message type: SETUP (5) Message type: CALL PROCEEDING (2) Message type: ALERTING (1) Message type: STATUS (125) Message type: CONNECT (7) Message type: CONNECT ACKNOWLEDGE (15) Message type: STATUS (125) And now the call is fully connected... Now I have no experience with PRI ISDN. However it seems to be that the ALERTING message is important and the Dial(SIP/511,30) is forcing this response as it starts to ring. Why Answer() does not do this I think is my problem... however this is probably because of a config issue. Or am I missing something? Could it be that ISDN service has not been setup correctly? I have called AAPT and their tech ran test and think it is all configured correctly on their side. Thank you for your help. zaptel.conf loadzone=au defaultzone=au # Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) B8ZS/ESF RED span=1,1,0,ccs,hdb3,crc4 bchan=1-10 unused=11-15,17,31 dchan=16 -------------------------- zapata.conf [trunkgroups] trunkgroup => 1,16 spanmap => 1,1,1 [channels] ; Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) B8ZS/ESF RED group=1 context=from-pstn switchtype=euroisdn signalling=pri_cpe channel => 1-10 group=1 context=default PRI debug output for a failed inbound: < Protocol Discriminator: Q.931 (8) len=45 < Call Ref: len= 2 (reference 3687/0xE67) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < User information layer 1: A-Law (35) < [18 03 a1 83 87] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 < ChanSel: As indicated in following octets < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 7 ] < [6c 0c 21 83 30 37 33 33 38 37 35 35 35 35] < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation allowed of network provided number (3) '0733875555' ] < [70 09 c1 33 34 33 39 37 33 30 30] < Called Number (len=11) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '34397300' ] < [7d 02 91 81] < IE: High-layer Compatibility (len = 4) < [a1]sk*CLI> < Sending Complete (len= 1) -- Making new call for cr 3687 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 112 (cs0, Called Party Number) -- Processing IE 125 (cs0, High-layer Compatibility) -- Processing IE 161 (cs0, Sending Complete) q931.c:3509 q931_receive: call 3687 on channel 7 enters state 6 (Call Present) q931.c:2774 q931_call_proceeding: call 3687 on channel 7 enters state 9 (Incoming Call Proceeding) > Protocol Discriminator: Q.931 (8) len=11 > Call Ref: len= 2 (reference 3687/0xE67) (Terminator) > Message type: CALL PROCEEDING (2) > [18 04 e9 81 83 87] > Channel ID (len= 6) [ Ext: 1 IntID: Explicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 DS1 Identifier: 1 > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 7 ] -- Accepting call from '0733875555' to '34397300' on channel 1/7, span 1 -- Executing [EMAIL PROTECTED]:1] NoOp("Zap/7-1", "New Call in from-pstn: 0733875555") in new stack -- Executing [EMAIL PROTECTED]:2] Set("Zap/7-1", "GROUP()=OUT_5") in new stack -- Executing [EMAIL PROTECTED]:3] NoOp("Zap/7-1", "USED CHANNEL COUNT - OUT_5 = 1") in new stack -- Executing [EMAIL PROTECTED]:4] GotoIfTime("Zap/7-1", "8:30-17:15|mon-fri|25|dec?After-Hours-Queue|s|1") in new stack -- Executing [EMAIL PROTECTED]:5] GotoIfTime("Zap/7-1", "8:30-17:15|mon-fri|*|*?Inbound-Queue|s|1") in new stack -- Goto (Inbound-Queue,s,1) -- Executing [EMAIL PROTECTED]:1] Dial("Zap/7-1", "SIP/500| 6") in new stack -- Called 500 -- Got SIP response 486 "Busy Here" back from 192.168.0.188 -- SIP/500-0821ff70 is busy == Everyone is busy/congested at this time (1:1/0/0) -- Executing [EMAIL PROTECTED]:2] Dial("Zap/7-1", "SIP/518| 6") in new stack == Everyone is busy/congested at this time (1:0/0/1) -- Executing [EMAIL PROTECTED]:3] Answer("Zap/7-1", "") in new stack q931.c:2909 q931_connect: call 3687 on channel 7 enters state 8 (Connect Request) > Protocol Discriminator: Q.931 (8) len=15 > Call Ref: len= 2 (reference 3687/0xE67) (Terminator) > Message type: CONNECT (7) > [18 04 e9 81 83 87] > Channel ID (len= 6) [ Ext: 1 IntID: Explicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 DS1 Identifier: 1 > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 7 ] > [1e 02 81 82] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ] -- Executing [EMAIL PROTECTED]:4] BackGround("Zap/7-1", "ssa/welcome&ssa/please-hold&ssa/or-choose&ssa/main-menu") in new stack -- <Zap/7-1> Playing 'ssa/welcome' (language 'en') < Protocol Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 (reference 3687/0xE67) (Originator) < Message type: STATUS (125) < [08 03 80 e4 18] < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) < Ext: 1 Cause: Invalid information element contents (100), class = Protocol Error (e.g. unknown message) (6) ] < Cause data 1: 18 (24) < [14 01 06]> < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Call Present (6) -- Processing IE 8 (cs0, Cause) -- Processing IE 20 (cs0, Call State) < Protocol Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 (reference 3687/0xE67) (Originator) < Message type: STATUS (125) < [08 03 80 e4 18] < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) < Ext: 1 Cause: Invalid information element contents (100), class = Protocol Error (e.g. unknown message) (6) ] < Cause data 1: 18 (24) < [14 01 06]> < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Call Present (6) -- Processing IE 8 (cs0, Cause) -- Processing IE 20 (cs0, Call State) -- <Zap/7-1> Playing 'ssa/please-hold' (language 'en') < Protocol Discriminator: Q.931 (8) len=45 < Call Ref: len= 2 (reference 3687/0xE67) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < User information layer 1: A-Law (35) < [18 03 a1 83 87] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 < ChanSel: As indicated in following octets < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 7 ] < [6c 0c 21 83 30 37 33 33 38 37 35 35 35 35] < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation allowed of network provided number (3) '0733875555' ] < [70 09 c1 33 34 33 39 37 33 30 30] < Called Number (len=11) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '34397300' ] < [7d 02 91 81] < IE: High-layer Compatibility (len = 4) < [a1]sk*CLI> < Sending Complete (len= 1) -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 112 (cs0, Called Party Number) -- Processing IE 125 (cs0, High-layer Compatibility) -- Processing IE 161 (cs0, Sending Complete) Timed out looking for connect acknowledge q931.c:2973 q931_disconnect: call 3687 on channel 7 enters state 11 (Disconnect Request) > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 3687/0xE67) (Terminator) > Message type: DISCONNECT (69) > [08 02 81 90] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 3687/0xE67) (Originator) < Message type: RELEASE (77) q931.c:3759 q931_receive: call 3687 on channel 7 enters state 0 (Null) -- Channel 1/7, span 1 got hangup, cause -1 == Spawn extension (Inbound-Queue, s, 4) exited non-zero on 'Zap/7-1' NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 3687/0xE67) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 90] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null -- Hungup 'Zap/7-1' ----------------------------------------------------------------------------------------------------------------- PRI Debug output for successful inbound: ---------------------------------------------------------------------------------------------------------------- This is included in a reply as the message was to big. --
Daniel
Johnson
Systems Administrator / Systems Development Scanning Systems Australia 
Office: +61 7 3387 5555 Facsimile: +61 7 3387 5588 E-mail: [EMAIL PROTECTED] Website: http://www.scanningsystems.com.au |
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
