Matthew Fredrickson wrote:
Daniel Johnson wrote:
Hi,
I have a 10 line PRI E1 ISDN service from AAPT. Connected to Asterisk
1.4 via a Digium TE121P.
All oubound calls work fine.
Inbound works only if I Dial a SIP phone directly or as the first step.
This phone MUST NOT be busy or else the call will fail.
It would appear that your zapata.conf is incorrect. One of your
problems (and maybe all of them) is that it looks like you used the
spanmap and trunkgroup way to setup your PRI. This is *ONLY* supposed
to be used for NFAS PRIs (where you have multiple trunks per PRI).
There is some tricky code in there which, when configuring using those
parameters, causes it to send the channel ID in an NFAS friendly manner
(which most non NFAS configured switches do not appreciate).
Instead, comment out any trunkgroups or spanmaps you may have setup in
zapata.conf, and do as follows:
signalling=pri_ ; where pri_ is either pri_net or pri_cpe
channel=1-23 ; or whatever your channels are associated with the PRI.
Matthew Fredrickson
Digium, Inc.
Hi Matthew,
Removing the trunkgroups and spanmaps has resolved this issue.
Thanks
*Daniel Johnson*
Systems Administrator / Systems Development
Scanning Systems Australia
*Office:* +61 7 3387 5555
*Facsimile:* +61 7 3387 5588
*E-mail:* [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
*Website:* http://www.scanningsystems.com.au
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
