On Fri, 05 Dec 2008 10:59:54 -0500, Neil Fusillo wrote: >Michael, > >Was there something particularly special you had to do to get your M3 to >work? I'm now on my second one from E4 Technologies (from whom I'm still >waiting for a return service call), and both of them, after following >the instructions in the manual, have the same problem. > >Neither one will pick up an IP from DHCP. If I set a static IP with the >handset (which pairs to the base just fine), I can then ping them when >they boot, but the web configuration service is unavailable (nothing >running on port 80, as if it never gets through the boot process). > >Hitting the up volume button on the phone gives me info of an >ff:ff:ff:ff:ff:ff mac accress, no IP (with DHCP) or the static I've put >in, and a Boot Status of 'Failed' > >Was there a trick to getting these running? I've done a factory reset. >I've tried different cables. Different switches. Now different handsets >and base stations. Nothing. Same message every time.
>Did you run into anything similar, or am I just lucky? I had no such troubles. Just plugged in and went. What firmware release does it have? Mine were v1.22 just the other day when I checked, but I have it set to D/L the current beta automatically once a day. Michael -- Michael Graves mgraves<at>mstvp.com http://blog.mgraves.org o713-861-4005 c713-201-1262 sip:[EMAIL PROTECTED] skype mjgraves fwd 54245 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
